Biblio

Checcucci M, Schneider A, Marconcini M, Rubechini F, Arnone A, De Franco L, Coneri M.  2015.  A Novel Approach to Parametric Design of Centrifugal Pumps for a Wide Range of Specific Speeds. 12th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows.

Pinelli L, Poli F, Di Grazia E, Arnone A, Taddei F, De Lucia M, Torzo D.  2015.  Numerical and Experimental Study of the Tone Noise Generation By a Turbine Rear Frame. 22nd International Congress on Sound and Vibration, (ICSV22).

Pinelli L, Poli F, Arnone A, Guérin S, Holewa A, Aparicio JRFernán, Puente R, Torzo D, Favre C, Gaetani P et al..  2015.  On the Numerical Evaluation of Tone Noise Emissions Generated by a Turbine Stage: an In-Depth Comparison Among Different Computational Methods. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. 2B: Turbomachinery

Giovannini M, Marconcini M, Rubechini F, Arnone A, Bertini F.  2015.  Scaling 3D Low-Pressure Turbine Blades for Low-Speed Testing. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. 2B: Turbomachinery

Bellucci J, Rubechini F, Arnone A.  2015.  Some Experiences About the Impact of Unsteadiness in Turbine Flows. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition.

Marconcini M, Pacciani R, Arnone A.  2015.  Transition Modelling Implications in the CFD Analysis of a Turbine Nozzle Vane Cascade Tested Over a Range of Mach and Reynolds Numbers. 12th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows.

Marconcini M, Pacciani R, Arnone A.  2015.  Transition Modelling Implications in the CFD Analysis of a Turbine Nozzle Vane Cascade Tested Over a Range of Mach and Reynolds Numbers. Journal of Thermal Science. 24(6):526-534.

Marconcini M, Bianchini A, Checcucci M, Ferrara G, Arnone A, Ferrari L, Biliotti D, Rubino D T.  2016.  A 3D Time-Accurate CFD Simulation of the Flow Field Inside a Vaneless Diffuser During Rotating Stall Conditions. ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. 2D: Turbomachinery:V02DT42A029;11pages.

Giovannini M, Rubechini F, Marconcini M, Arnone A, Bertini F.  2016.  Analysis of a LPT Rotor Blade For a Geared Engine. Part I: Aero-Mechanical Design and Validation. ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. 2B: Turbomachinery:V02BT38A053;12pages.

Pacciani R, Rubechini F, Marconcini M, Arnone A, Cecchi S, Daccà F.  2016.  A CFD-Based Throughflow Method With An Adaptive Formulation For The S2 Streamsurface. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. 230(1):16-28.

Marconcini M, Bianchini A, Checcucci M, Biliotti D, Giachi M, Rubino D T, Arnone A, Ferrari L, Ferrara G.  2016.  Estimation of the Aerodynamic Force Induced by Vaneless Diffuser Rotating Stall in Centrifugal Compressor Stages. ATI 2016 - 71st Conference of the Italian Thermal Machines Engineering Association. Energy Procedia 101:734-741.

Peruzzi L, Bellucci J, Pinelli L, Arnone A, Arcangeli L, Cosi L, Mazzucco M.  2016.  Numerical aerodynamic damping evaluation of high-pressure steam turbine blades for aeromechanical characterization. ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines:V008T26A012;10pages.

Bellucci J, Rubechini F, Arnone A, Arcangeli L, Maceli N, Paradiso B, Gatti G.  2016.  Numerical and experimental investigation of axial gap variation in high pressure steam turbine stages. ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines:V008T26A015;12pages.

Giovannini M, Marconcini M, Rubechini F, Arnone A, Bertini F.  2016.  Scaling Three-Dimensional Low-Pressure Turbine Blades for Low-Speed Testing. ASME Journal of Turbomachinery. 138(11):111001-1-9.

Vanti F, Pinelli L, Poli F, Arnone A.  2017.  Aeroelastic Investigation of Turbine Blade Assemblies: Cluster System and Mistuned Rows. 12th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics ETC12.

Pacciani R, Marconcini M, Arnone A.  2017.  A CFD Based Throughflow Method with Three-Dimensional Flow Features Modelling. 12th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics ETC12.

Pacciani R, Marconcini M, Arnone A.  2017.  A CFD-Based Throughflow Method With Three-Dimensional Flow Features Modelling. International Journal of Turbomachinery, Propulsion and Power . 2(3)

Marconcini M, Bianchini A, Checcucci M, Biliotti D, Giachi M, Rubino D T, Arnone A, Carnevale E A, Ferrari L, Ferrara G.  2017.  Determinazione della forza indotta dallo stallo rotante nei compressori centrifughi con diffusore liscio. La Termotecnica. 3:50-54.

Cozzi L, Rubechini F, Marconcini M, Arnone A, Astrua P, Schneider A, Silingardi A.  2017.  Facing the Challenges in CFD Modelling of Multistage Axial Compressors. ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. 2B: Turbomachinery:pp.V02BT41A007;11pages.

Bellucci J, Rubechini F, Arnone A, Arcangeli L, Maceli N, Paradiso B, Gatti G.  2017.  Numerical and experimental investigation of axial gap variation in high pressure steam turbine stages. Journal of Engineering for Gas Turbines and Power. 139(5):052603(9pages).

Becciani M, Bianchini A, Checcucci M, Ferrari L, De Luca M, Marmorini L, Arnone A, Ferrara G.  2017.  A Pre-Design Model to Estimate the Effect of Variable Inlet Guide Vanes on the Performance Map of a Centrifugal Compressor for Automotive Applications. 13th International Conference on Engines & Vehicles.

Marconcini M, Bianchini A, Checcucci M, Ferrara G, Arnone A, Ferrari L, Biliotti D, Rubino D T.  2017.  A Three-Dimensional Time-Accurate Computational Fluid Dynamics Simulation of the Flow Field Inside a Vaneless Diffuser During Rotating Stall Conditions. ASME Journal of Turbomachinery. 139(2):021001.

Barreca P, Pinelli L, Vanti F, Arnone A.  2018.  Aeroelastic Investigation of a Transonic Compressor Rotor with Multi-Row Effects. ATI 2018 - 73rd Conference of the Italian Thermal Machines Engineering Association. Energy Procedia 148:58-65.

Vanti F, Pinelli L, Arnone A, Schneider A, Astrua P, Puppo E.  2018.  Aeroelastic Optimization of an Industrial Compressor Rotor Blade Geometry. ASME Turbo Expo 2018: Turbine Technical Conference and Exposition. Volume 2D: Turbomachinery:pp.V02DT46A016;10pages.

Cozzi L, Rubechini F, Giovannini M, Marconcini M, Arnone A, Schneider A, Astrua P.  2018.  Capturing Radial Mixing in Axial Compressors with CFD. ASME Turbo Expo 2018: Turbine Technical Conference and Exposition. Volume 2C: Turbomachinery:pp.V02CT42A025;11pages.